Indicates whether the IP routing function can be enabled "-" indicates that the bridgingįunction is disabled for both protocol types. ![]() Specifies types of protocols (IP and Others) for which theīridging function can be enabled. Specifies the management status of the bridge group, which Interface does not belong to any bridge group, no information is displayed. If the specified bridge group number does not exist or the specified.Output displays the number of the bridge group. If the specified interface is added to a bridge group, the command.Output displays information about all bridge groups. If bridge-id is not specified, the command.Table 6-63 Description of the display bridge information command outputĭisplays information about a bridge group. Group, and removes member interfaces from the bridge group. Otherwise, the undo bridge bridge-id command will not take effect.Īfter a bridge group has been deleted by using the undo bridge bridge-id command, the systemĭeletes attribute configurations and static MAC entries of the bridge If the bridge group toīe deleted has a Bridge-if interface, you need to delete the Bridge-if The undo bridge bridge-id command is used to delete a bridge group. Has been created by using the bridge command adds ![]() Group by using the bridge command before adding The configuration of transparent bridges isĮasy and will not affect the existing LAN. ![]() Scale without any special configurations.Ĭonnect different LANs. BridgesĪllow end users to construct large-scale networks and expand the network Networks), bridges can reduce costs for network maintenance. On small-scale networks (especially on distributed
0 Comments
Leave a Reply. |